| Author |
Message |
|
| antonio.collado |
 Posted: Wed Aug 14, 2013 10:20 pm |
 |
|
|
Joined: 27 Sep 2009
Posts: 1
|
My instruction manual when explainning cutting panels, only explains the panels one on top of the other. I would like to know if the panels that go side by side can be shown the limits where one starts and ends.
For example I have an area to cut a logo of 144" long and 96" wide, but I would like to cut it in pieces of 60" lon and 18" wide. (Can not see the 101,102 etc divisions)
Thanks in advance. |
|
|
| Back to top |
 
|
| Ivan |
| Posted: Tue Sep 17, 2013 1:38 pm |
|
|
|
Joined: 19 Apr 2007
Posts: 352
Location: Montreal
|
The software show the panels 101,201,301 etc if your job is higher of your vinyl put on the cutter.
The panels (101,201….) will be show if the value in MATERIAL options (cutting control panel) is smaller of your job height.
Most of the vinyl cutter on the market removed the maximum length option (101,102,103 etc) but, you changed the value from Page length.
from Plotter code/Hardware/Paper lenght |
_________________
Ivan Polanco, Sales manager/Support
Signmax.us Profesionnal signmaking ressources |
|
| Back to top |
 
|
|
|
